Email Us


The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.


  • Total enclosed structure.

  • Material: PC+ABS,wet-proof、water-proof、dust-proof、anti-aging, protection level up to IP66.

  • Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.

  • Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC adaptor installation, easy maintenance.

  • Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.

  • Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.


  • Environmental requirement

      Working temperature:-40℃~+85℃

      Relative humidity:≤85%(+30℃)

      Atmospheric pressure:70KPa~106Kpa

  • Main technical datasheet

      Insertion loss:≤0.2dB

      UPC return loss:≥50dB

     APC return loss:≥60dB

     Life of insertion and extraction:>1000 times

  • Thunder-proof technical datasheet

       The grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);


      The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V

  Configuration table

Table 1 Model and configuration



Size(Pic 1)

Max Capacity

Installation Size(Pic 2)

Cable ways





D*E (mm)


Fiber Access Terminal




1 x 1:16/

3 x 1:8


Cutted/uncutted cable

Pic_1_Box_Size.jpg                                                Pic_2_Box_Size.jpg

                Pic 1 Box Size                                                                            Pic 2 Box Size

Product cable ways

Product cable ways

1.Lid;2.Lock coat;3.Lock;4.Seal gasket;5.Splicing flap plate;6.Adaptor holder;7.Adaptor;8.Lid lock joint bracket;9.Lid lock clip;10.Base;11. Cable strengthen mound layer;12. Cable entrance;13.Lock panel;14.PLC mounting position


 1.Wall-mounted installation

Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten.

2.Pole-mounted installation

     Fix 1 set of the easy pole ring to the telecom pole .

                       Pic_5_Wall_mounted_installation.png                                                          Pic_5_Pole_ring_installation.png

                 Pic 5 Wall mounted installation                                                                                   Pic 5 Pole ring installation

Product Inquiry
Email us if you are interested in JUNPU communication fiber optic products and solutions.
Other 24 Core Outdoor Fiber Termination Box
Latest News & Blog